NEEDO · SUPPLIER QUALITY & AEROSPACE PROCUREMENT

Review a First Article Inspection Report

Give Needo the purchase order, customer quality clauses, current drawing, ballooned drawing, FAIR package and supporting material or process certificates. Needo can organize the part identity, FAI scope, characteristic-to-evidence traceability, actual results and missing records into a reviewable discrepancy register. The current standard, customer flow-down and authorized quality engineer remain the acceptance authority.

What to give Needo

1. Purchase order, line item, contract and customer quality clauses with their revisions

For example: product name, model, material, size — or simply a photo or product link.

2. Applicable AS9102 revision and any customer-specific FAI forms, submission or approval requirements

For example: product name, model, material, size — or simply a photo or product link.

3. Part number, part name, assembly relationship, drawing revision, model/configuration and supplier manufacturing site

For example: product name, model, material, size — or simply a photo or product link.

4. Ballooned drawing or controlled characteristic list, technical specification and applicable notes

For example: product name, model, material, size — or simply a photo or product link.

5. FAIR package including Forms 1, 2 and 3 or the customer-approved equivalent, report identifier and FAI reason

For example: retailers, distributors, or procurement heads in hospitality.

6. Full or partial/delta FAI rationale, prior approved FAI baseline and change records where applicable

Add it when it changes which options are acceptable to you.

7. Material certificates, heat/lot records, special-process certificates, test reports and sub-tier supplier evidence

For example: product name, model, material, size — or simply a photo or product link.

8. Dimensional results, units, tolerances, inspection methods, gauge identifiers and calibration evidence where required

For example: product name, model, material, size — or simply a photo or product link.

9. Nonconformance records, deviations, concessions, customer approvals and open corrective actions

For example: retailers, distributors, or procurement heads in hospitality.

Need real matches, not just a direction?

Start free. When you want Needo to do the deep work, a Verified Shortlist gives you up to 10 cross-checked matches with sources, contact routes, red flags and ready-to-send outreach — and if fewer than 5 can be verified, your credits come back automatically.

See what a Verified Shortlist includes →

What the solution should give you

Understand the goal

A report identity and scope summary tied to the exact part, drawing revision, supplier site and PO

Research what matters

A drawing-to-report characteristic matrix showing balloon, requirement, tolerance, actual result, unit, method and evidence

Compare and verify

A material and special-process traceability matrix linked to part, heat/lot, processor and certificate

Move it forward

A package completeness check across Forms 1, 2 and 3 and the customer-specific attachments

Understand the goal

A discrepancy register for missing characteristics, mismatched revisions, out-of-tolerance results, unclear methods and unsupported exclusions

Research what matters

A deviation and nonconformance review showing the record, disposition and customer approval still required

Compare and verify

A partial-FAI baseline and changed-characteristic map where a delta report is submitted

Move it forward

A GO / CLARIFY / HOLD review pack with questions, owners and evidence references for the authorized quality engineer

Real requests to try

Why this is different from a search list

Needo starts from the outcome, not a pile of links. It can research current evidence, compare options against your constraints, identify what still needs verification, prepare a next action and keep the problem open when real-world feedback changes the situation.

Frequently asked questions

Is a First Article Inspection Report the same as a product certificate of conformity?

No. A FAIR records first-article inspection evidence against defined design and contractual requirements. A certificate of conformity is a different declaration, and ongoing production or lot acceptance may require separate controls.

Does AS9102C apply to every manufactured product?

No. AS9102 is primarily an aerospace, space and defence supply-chain standard, although IAQG notes it can be used in other sectors. It applies when the contract, customer or organization's approved process requires it.

Can Needo determine whether a full or partial FAI is required?

Needo can compare the stated reason, prior baseline, changes and customer clauses, then identify questions. The applicable standard and customer flow-down govern the required scope; the authorized quality function must confirm it.

Can Needo approve a nonconformance or sign the FAIR?

No. Needo can organize the evidence and flag the missing disposition or approval. Only the authorized customer or supplier quality authority can make the required acceptance or concession decision.

Does an accepted FAIR mean every later production lot is accepted?

No. First-article evidence does not replace ongoing process controls, required lot inspection, testing, receiving checks or shipment release conditions.

Can Needo verify that a measuring gauge is calibrated?

Needo can review calibration records supplied and flag missing identifiers or dates. It cannot physically inspect or calibrate equipment or establish measurement-system suitability without the responsible quality and metrology process.

Share this problem path

If this is the problem someone you know is dealing with, share the actual Needo solution path instead of explaining it yourself.

Need a different outcome?

Explore more problem-specific Needo solution paths →