NEEDО · EU TRADE COMPLIANCE & SUPPLIER DATA

CBAM Supplier Emissions Data: What EU Importers Should Request for 2026 Imports

The EU Carbon Border Adjustment Mechanism (CBAM) entered its definitive period on 1 January 2026. For an EU importer, the practical challenge is no longer just explaining CBAM to a supplier: it is deciding which goods are in scope, identifying the responsible authorised declarant, and obtaining the right installation and embedded-emissions evidence for the 2026 reporting period. A supplier spreadsheet is not automatically a valid emissions calculation, and an emissions estimate is not the same as actual verified emissions. This guide helps importers and non-EU producers build a controlled supplier data request, distinguish the actual-value and default-value routes, and identify what still needs an accredited verifier or the responsible customs and compliance professional. It reflects European Commission material available on 15 November 2026; check the current legislation, CN codes and competent-authority instructions before relying on it for a declaration.

Editorial illustration showing an industrial installation, fuel and electricity inputs, embedded-emissions records and a shipment moving toward the European Union

1. Confirm that the imported goods and importer are in scope

Start with the exact goods description and the current Combined Nomenclature (CN) code, then compare it with the goods listed in Annex I of the CBAM Regulation and the current Commission guidance. CBAM is not a blanket carbon charge on every product made from metal or every shipment entering Europe. The covered categories include specified goods in cement, iron and steel, aluminium, fertilisers, electricity and hydrogen, together with the product codes and conditions in the legal scope. A broad commercial description such as ‘steel parts’ or ‘aluminium components’ is not enough to decide whether a particular code is covered.

For 2026, the Commission describes a single annual mass-based threshold of 50 tonnes for relevant CBAM goods other than hydrogen and electricity. Hydrogen and electricity have separate authorisation treatment. Do not apply the threshold to one invoice in isolation or assume that a low-volume shipment is outside every CBAM rule. Check the importer's annual position, the goods and codes, the current regulation and the customs declaration facts with the authorised declarant or national competent authority.

Scope facts to establish first

  • Exact product description, CN code, net mass and supplementary unit where applicable.
  • Country of origin and country or installation of production; do not treat these as interchangeable fields.
  • EU importer, EORI, Member State of establishment and customs representative role.
  • Annual quantity of covered goods and whether hydrogen or electricity is involved.
  • Whether the importer has applied for or holds the required authorised CBAM declarant status or application reference.

2. Separate the declarant's responsibility from the producer's data role

The authorised CBAM declarant is responsible for the CBAM declaration. Depending on the arrangement, that may be the EU importer or an indirect customs representative acting as declarant. The producer outside the EU supplies installation and production information needed to determine embedded emissions. A customs broker, freight forwarder, consultant or commercial agent may help coordinate documents, but that does not make the intermediary the producer of the goods or the source of the installation's actual verified emissions.

The Commission's 15 October 2026 Questions and Answers say that importers should receive actual verified emissions for imported goods from the third-country operator that produced those goods. Be cautious if an unrelated intermediary approaches you with a verification report it claims to have purchased or generated. Check the installation, operator, reporting period, verifier and report scope through the official process. The declarant remains responsible for the declaration even when supplier or verifier information is used.

Map the parties and evidence owner

  • EU importer or indirect customs representative: declaration, account and compliance ownership.
  • Third-country installation operator: production and installation data, and coordination of actual emissions where that route is used.
  • Precursor producer: evidence for relevant precursor emissions when actual values are relied on.
  • Accredited CBAM verifier: independent verification within its accredited scope.
  • Internal finance, customs and sustainability owners: review of quantities, classification, reporting period and evidence handoff.

3. Choose the actual-verified or default-value route deliberately

The Commission explains that CBAM declarations can use Commission default values or actual values. If the importer uses actual values, the producer in the third country must provide verified emissions data on the total embedded emissions. Actual values therefore require more than a factory estimate: the producer needs a suitable monitoring and calculation process, and the relevant figures must be verified by an accredited CBAM verifier under the applicable rules.

There is an important 2026 reporting-period detail. The Commission's Q&A updated on 15 October 2026 says that goods imported during 2026 use 2026 as the reporting period for determining embedded emissions, even if the goods were physically produced earlier. For goods imported in 2026, actual verified emissions for the 2026 reporting period cannot be supplied for goods produced before 1 January 2026; where actual verified emissions corresponding to 2026 are not available, default values must be used. Do not ask a supplier to relabel a prior-year estimate as verified 2026 data.

The first annual CBAM declaration covering 2026 imports is due by 30 September 2027, together with the corresponding certificate surrender. That gives importers time to resolve the route, but it does not remove the need to capture accurate product, quantity, installation and reporting information while the transaction records are available.

Record the route for each goods line

  • Actual values planned: identify the producing installation, reporting period, calculation method and accredited-verifier pathway.
  • Default values planned: identify the applicable Commission default value and preserve the product, origin, quantity and code evidence supporting its use.
  • Mixed route: document which goods or precursor inputs use actual verified values and which use defaults; do not blend them without a traceable basis.
  • Unknown route: ask the declarant and producer to decide and record the owner and deadline for that decision.

4. Build a precise installation and product identity sheet

An emissions figure is only useful when it can be tied to the correct goods and producing installation. Ask for the installation operator's legal name, physical site address, country, installation identifier where available, product family, CN code, production process and reporting period. If the same company operates several sites, do not assume a corporate average represents the installation that made the imported goods. If a site contains more than one installation or production process, ask the operator to explain the boundary used in its CBAM records.

Define the product's functional unit and the quantity basis used in the calculation. The unit and methodology differ by goods category. Reconcile the supplier's product name, grade, model or specification with the commercial invoice and customs description. Record whether the goods are simple or complex under the CBAM methodology and whether relevant precursor materials need to be included. These are technical classification questions for the applicable rules, not fields to guess from a sales catalogue.

Identity fields for the supplier pack

  • Installation operator's legal name, site address, country and registry or installation identifier where available.
  • Product description, CN code, grade or model and functional unit.
  • Production process and route, including any material process changes during the reporting period.
  • Reporting period and production or import lot references needed to reconcile the goods.
  • Quantity, net mass, output volume and the unit used in the emissions calculation.

5. Request process and energy data at the correct emissions boundary

Ask the installation operator to explain the calculation boundary and provide the source information required by the current CBAM methodology. Depending on the goods and process, this can include fuel and material source streams, process emissions, electricity consumption, production output, emission factors, allocation across products and the records used to support each figure. Request the underlying period and unit beside each number. A single intensity figure without its product, process, reporting period and source basis is difficult to review and may not be usable for the declarant's purpose.

Do not request or combine direct and indirect emissions as if every sector uses the same scope. The Commission's current Q&A distinguishes the goods categories: for iron and steel, aluminium and hydrogen, the CBAM scope is limited to direct emissions; for cement and fertilisers, both direct and indirect emissions are to be declared, and the Q&A also identifies agglomerated iron ore in that treatment. Electricity has its own calculation rules. Check the current methodology for the exact CN code and product before sending a sector-specific template.

Ask the operator to identify

  • Direct process and fuel emissions included in the applicable product calculation.
  • Indirect emissions or electricity-related data only where required for the relevant goods and reporting route.
  • Fuel, raw-material and electricity source records, consumption quantities and units.
  • Production output, functional unit, allocation method and any assumptions or exclusions.
  • Source documents and calculation worksheets that allow the verifier and declarant to follow the figures.

6. Trace precursor goods and complex production routes

For complex CBAM goods, relevant precursor materials can contribute embedded emissions to the final product. The producer should identify which precursors are relevant under the applicable methodology, where they were produced, which installation supplied them and how their emissions were included. A generic raw-material list is not enough if the calculation relies on actual values from a separate installation.

The Commission's October 2026 Q&A explains that precursor emissions can use default values or actual verified emissions. If actual values are used, the installation operator that produced the precursor must provide the actual verified emissions to the operator producing the complex good. Until the stated future Registry-sharing arrangements are available, operators may need to exchange precursor information outside the Registry. The final verifier must be able to review the precursor report and its connection to the complex good.

Precursor traceability fields

  • Precursor name, code or specification and quantity consumed per functional unit.
  • Precursor-producing installation and operator identity.
  • Whether default or actual verified values are used for that precursor.
  • Reporting period, verification report and evidence linking the precursor to the final production process.
  • Any missing supplier, installation or batch link that prevents the final operator from supporting the calculation.

7. Request the verification chain—not just an emissions spreadsheet

For an actual-value route, ask who is responsible for the installation's monitoring and calculation, which accredited CBAM verifier will review it, what product and reporting period the verification covers, and how the verified information will reach the authorised declarant. The Commission says operators should take concrete steps in 2026 to monitor and calculate embedded emissions and then have the calculation verified by an accredited CBAM verifier. The first verification reports were expected in early 2027 according to the October Q&A, so a supplier may be preparing the data without yet having a final report.

Ask whether the third-country operator is registered in the CBAM Registry. The Commission says registration can facilitate secure transfer of actual verified emissions to the declarant. If the operator is not registered, information may need to be exchanged through private channels and entered by the importer. Protect the files, verify the sender and retain the report version and source. Do not describe an unverified calculation as an accredited verification report.

Verification evidence to track

  • Operator's confirmation that the data belongs to the installation that produced the goods.
  • Verifier identity, accreditation status and relevant scope checked through official channels.
  • Verification report, reporting period, product coverage and any limitations or findings.
  • CBAM Registry registration or the agreed secure alternative data-transfer route.
  • A record of who supplied the file, when it was received and which declaration line it supports.

8. Copy-ready supplier data request

Use the following as a first request, then tailor it to the product category and the Commission's current communication template. It is a request for evidence, not a substitute for the official calculation methodology or the declarant's legal duties. Ask the supplier to mark unavailable fields as unavailable and explain why rather than inserting estimates without a label.

Supplier request checklist

  • Please confirm the installation operator, site address, installation identifier and the exact product and CN code covered.
  • Please identify the production process, functional unit, reporting period and quantities supplied to our EU importer.
  • Please state whether you can provide actual verified emissions for the 2026 reporting period or whether the importer should use the applicable Commission default values.
  • For actual values, please provide the calculation summary, relevant source-stream and energy records, output and allocation basis, and the accredited CBAM verification report when available.
  • Please identify relevant precursor materials, their producing installations, the value route used and supporting verification reports where actual values are claimed.
  • Please identify which direct and indirect emissions categories apply to this product under the current CBAM methodology and explain any exclusions.
  • Please confirm CBAM Registry registration or the secure method by which verified data will be transmitted to the authorised declarant.
  • Please identify the responsible technical contact, file version, issue date, assumptions and any data gaps that remain open.

9. Review the pack before handing it to the authorised declarant

Create one record per goods line or defined product group, then connect it to the customs code, installation, quantity, reporting period, actual/default route and supporting documents. Check that the reporting period is consistent with the 2026 import rules and that the evidence covers the goods in the declaration. If the supplier provides one company-wide emissions figure for several sites or grades, ask for the applicable breakdown rather than allocating it yourself.

Keep source data, supplier representations, calculated values, verified values and Commission default values in separate fields. Record missing files, inconsistent units, unsupported precursor values and report limitations as open issues. The authorised declarant is legally responsible for the declaration; the supplier data pack should make review easier, not obscure who owns each decision.

A simple data-status register

  • Confirmed: the source and scope directly support the field.
  • Supplier-stated: provided by the operator but not independently verified by your team.
  • Verified: covered by the relevant accredited verification evidence.
  • Default: taken from the applicable Commission value and version.
  • Open: missing, conflicting, out of period or not linked to the goods; assign an owner and due date.

10. Worked example: an Indian steel producer supplying an EU importer

Illustrative scenario: an EU importer buys steel components from an Indian producer for customs release during 2026. Procurement has the supplier's invoice, product description and a general statement that the factory uses an electric-arc furnace. That is not yet a CBAM evidence pack. The importer first confirms the exact CN code and annual covered mass, identifies the authorised declarant, and asks which installation and production route made the goods.

The producer then identifies the installation, product functional unit, reporting period, output and relevant process and energy records. If the calculation relies on actual values, the producer must arrange the appropriate 2026 monitoring and accredited verification; any relevant precursor actual values need their own traceable evidence. If verified actual values for the 2026 reporting period are unavailable, the declarant uses the applicable default route rather than treating a prior-year factory estimate as verified 2026 data. The example is illustrative and is not a statement about a real Needo customer or a binding emissions calculation.

Decision record

  • Verified: product code, customs release period and installation identity are reconciled.
  • Supplier-stated: process description and source records received, pending verification.
  • Open: actual verified 2026 emissions and precursor report not yet available.
  • Next move: confirm the applicable default route or complete the accredited verification path before the declaration handoff.

11. Use Needo to prepare the supplier evidence pack

Needo can organize the CN-code and product facts you provide, map the importer, declarant, installation and precursor roles, draft a tailored supplier request, compare the files received and create a completeness register. It can also prepare questions about the reporting period, direct and indirect emissions scope, actual/default route, verifier and Registry transfer. This is useful when several suppliers, product grades or production sites are involved and the importer needs one consistent handoff format.

Needo does not determine a binding CBAM liability, calculate or certify embedded emissions, issue a verification report, grant authorised declarant status or submit the annual declaration. The importer or authorised declarant and its qualified advisers remain responsible for the current legal and technical determinations.

12. Final checklist before the CBAM data handoff

Do not mark the pack complete merely because the supplier has returned a spreadsheet. The evidence should connect the goods, CN code, importer, installation, reporting period, method, source data and verifier. If one of those links is missing, keep the issue visible and assign it to the person who can resolve it.

Before declaration preparation

  • Product scope, CN code, annual mass threshold and hydrogen/electricity treatment checked.
  • Importer, EORI, authorised declarant and Member State responsibilities identified.
  • Installation operator, site, production route, goods and reporting period reconciled.
  • Actual/default route recorded for each goods line and precursor.
  • Direct and indirect emissions categories checked against the current goods-specific rules.
  • Source data, production quantities, calculation basis and precursor evidence linked.
  • Accredited verifier, report scope and Registry or secure handoff route documented.
  • Open questions, owners, deadlines and final declarant review recorded.

Sources and further reading

Sources support the specific points noted above. Confirm current requirements for your product, destination and contract before committing.

Need the actual problem solved?

This guide explains the method. Needo can work from your specific requirement, compare relevant options, verify important details and help move the next step forward.

Start with your exact problem →

Selling or exporting? See live buyer requirements by product · see a sample verified shortlist