NEEDО · EU IMPORT COMPLIANCE

EU Cold-Rolled Steel Anti-Dumping Duty 2026: Rates, TARIC Scope and Invoice Checklist

As of 18 November 2026, Commission Implementing Regulation (EU) 2026/2547 is in force. It imposes definitive anti-dumping duties on certain cold-rolled flat steel products originating in India, Japan, Taiwan, Türkiye and Vietnam from 17 November 2026. The headline percentage is not enough to price an order: the exact product scope, country of origin, legal producer, TARIC additional code and required invoice declaration all matter.

Needo editorial illustration of a European steel importer reviewing cold-rolled steel coils, a commercial invoice and a customs compliance checklist

What changed and when the measure applies

The European Commission adopted Regulation (EU) 2026/2547 on 13 November 2026. It was published in the Official Journal on 16 November and Article 3 provides that it enters into force on the day following publication. The definitive duties therefore apply from 17 November 2026.

The measure concerns only the product defined in Article 1(1) and originating in the five named countries. It is not a blanket duty on every steel product, every cold-rolled product or every shipment routed through one of those countries. Product identity and non-preferential origin must be established before the rate is selected.

The operative regulation, rather than a supplier quotation, news summary or old tariff screenshot, is the controlling starting point. Check the current TARIC measure for the exact customs declaration date because tariff measures and additional codes can change.

The first facts to establish

  • Expected EU customs entry or release-for-free-circulation date
  • Country of origin, not merely the country of dispatch or invoicing
  • Actual manufacturer and manufacturing site
  • Product grade, composition, width, thickness, finish and processing
  • Proposed CN code, full TARIC code and any additional producer code
  • The invoice declaration and supporting shipping evidence

Check whether the steel is actually within the product scope

Article 1(1) covers flat-rolled products of iron or non-alloy steel, or other alloy steel, excluding stainless steel, of all widths, cold-rolled (cold-reduced), not clad, plated or coated, and not further worked than cold-rolled. Those physical and processing characteristics matter. A product description such as 'steel coil' or 'cold rolled sheet' is not enough to establish scope.

The regulation excludes electrical flat-rolled products of iron or non-alloy steel; certain annealed black plates in coils below 0.35 mm; silicon-electrical steel; and high-speed steel. The importer should compare the actual technical specification with each exclusion rather than relying on a sales description or a code match alone.

If the product is coated, stainless, further worked, a different alloy, or otherwise outside the wording, do not apply the measure simply because a nearby tariff heading appears in the regulation. Conversely, do not assume an exclusion without evidence that the product meets its technical conditions.

Request these product details from the supplier

  • Steel grade and full chemical composition
  • Width, nominal thickness and thickness tolerance
  • Coil or sheet form and whether it is annealed
  • Surface finish and whether the material is clad, plated or coated
  • Any further processing after cold reduction
  • Manufacturer datasheet, mill test certificate and product photographs

Treat CN and TARIC codes as a starting point, not a shortcut

Article 1(1) lists CN headings including ex 7209 15 00, 7209 16 90, 7209 17 90, 7209 18 91, ex 7209 18 99, ex 7209 25 00, 7209 26 90, 7209 27 90, 7209 28 90, 7211 23 30, ex 7211 23 80, ex 7211 29 00, 7225 50 80 and 7226 92 00. The regulation also identifies the relevant TARIC subdivisions, including 7209 15 00 90, 7209 18 99 90, 7209 25 00 90, 7211 23 80 19, 7211 23 80 95, 7211 23 80 99, 7211 29 00 19 and 7211 29 00 99.

The prefix 'ex' is important: it means only the part of that tariff subheading described by the legal product definition is covered. It does not mean every product classified anywhere under the wider CN heading is automatically subject to the anti-dumping duty.

The EU Combined Nomenclature is an eight-digit classification system and TARIC integrates additional measures and subdivisions. Use the actual goods, technical evidence, origin and date in the Commission's TARIC database. If classification remains uncertain, ask the customs broker about Binding Tariff Information or another appropriate formal route.

Do not copy a code from a similar shipment

  • Match the technical product to the legal wording in Article 1(1)
  • Check whether the CN heading is marked 'ex'
  • Confirm the full TARIC code and measure date
  • Check country-of-origin and producer-specific additional codes
  • Retain any BTI decision or written classification advice relied upon

Country and producer duty rates under Regulation 2026/2547

The definitive rates are not identical across the five origins. The table in Article 1(2) also distinguishes named producers, other cooperating producers listed in the Annex and all other imports. Use the legal producer identity and the applicable TARIC additional code, not a trading name or the seller's office address.

  • India: 9.5% for JSW Steel Limited, JSW Steel Coated Products Limited, other cooperating companies listed in the Annex and all other imports originating in India.
  • Japan: 27.9% for Nippon Steel Corporation, Daido Steel Co., Ltd., other cooperating companies listed in the Annex and all other imports originating in Japan.
  • Taiwan: 20.7% for China Steel Corporation, Chung Hung Steel Corporation and other cooperating companies listed in the Annex; 27.0% for all other imports originating in Taiwan.
  • Türkiye: 7.8% for Borçelik and all other imports; 3.0% for Tatmetal; 4.9% for other cooperating companies listed in the Annex.
  • Vietnam: 16.0% for POSCO Vietnam, other cooperating companies listed in the Annex and all other imports originating in Vietnam.

Do not use a producer-specific rate without the required invoice declaration

Article 1(3) makes application of the individual producer rates conditional on a valid commercial invoice presented to the Member State's customs authorities. The invoice must contain a declaration dated and signed by an official of the issuing entity, with that official's name and function. The declaration identifies the volume in tonnes covered by the invoice, the manufacturer name and address, the TARIC additional code and the country concerned, and confirms that the information is complete and correct.

If the required declaration is not presented, the regulation says the all-other-imports rate for the applicable country is used. A supplier email saying 'we are an approved mill' or a generic certificate is not a substitute for the prescribed invoice wording.

The invoice is necessary but not the only evidence customs may examine. The Commission explains that customs authorities may request shipping documents or other records to verify the declaration and whether the claimed rate is justified. Keep the invoice, mill certificate, purchase order, packing list, bill of lading and manufacturer/origin records aligned.

Invoice review checklist

  • Dated and signed declaration appears on the valid commercial invoice
  • Signatory name and official function are identified
  • Covered quantity is stated in tonnes
  • Manufacturer legal name and address match the producer evidence
  • TARIC additional code and country concerned are correct
  • Shipping and production records support the invoice declaration

Calculate the anti-dumping amount on the correct value base

Article 1(2) applies the percentage to the net, free-at-Union-frontier price, before duty, of the product concerned. The Commission's explanatory table also expresses the rates on the CIF Union border price, customs duty unpaid. Do not apply the percentage to an arbitrary invoice subtotal, a retail resale price or a value that has not been reconciled to the legal customs basis.

Illustration only: if the relevant net free-at-Union-frontier price before duty is €100,000 and the covered goods originate in India, a 9.5% anti-dumping duty would be €9,500. This is the anti-dumping component only. It is not a complete landed-cost figure or a customs assessment.

Ordinary customs duties, VAT, freight, insurance, port charges, broker fees and any other applicable measures must be checked separately. The Commission's TARIC guidance notes that TARIC does not contain national VAT or excise rates, so do not treat a TARIC anti-dumping result as the full tax calculation.

Check customs entry dates and the earlier registration measure

The definitive measure entered into force on 17 November 2026. The Commission had previously made imports of the product subject to registration under Regulation (EU) 2025/2432, published in December 2025. Registration and collection of a definitive duty are different legal steps.

In Regulation 2026/2547, the Commission concluded that the conditions for retroactive collection under Article 10(4) were not met because provisional measures had not been imposed in this investigation. That is a specific conclusion in this regulation; it is not a reason to ignore the actual customs entry date, the registration history or any separate customs measure.

For goods already shipped, registered or entered before 17 November, assemble the customs declaration, release date, registration reference, invoice and shipping record. Ask the customs broker to assess the precise entry and any applicable procedure rather than assuming either automatic retroactive duty or automatic exemption.

Compare supplier quotes without misrepresenting origin

An EU importer may need to compare offers from different origins after the new measure. Compare the same steel grade, dimensions, finish, tolerance, quantity, delivery date, Incoterm, payment terms, mill evidence and after-sales commitments. A lower ex-works price can be offset by a higher duty, freight, lead time, quality risk or working-capital requirement.

Country of dispatch, invoice address and port of loading do not by themselves establish origin. Do not treat transshipment, a third-country invoice or relabelling as a lawful way to change origin or avoid a trade remedy. Verify the actual manufacturer and origin under the applicable rules, and obtain professional advice where production or processing in more than one country makes origin complex.

A useful supplier comparison records the duty assumption separately from the supplier's quote. Mark it provisional until the exact product scope, origin, producer code and customs date have been checked.

Compare on one commercial basis

  • Same grade, thickness, width, tolerance and surface condition
  • Same net tonnes, packaging and delivery location
  • Country of origin and legal producer independently evidenced
  • Applicable anti-dumping rate and ordinary tariff shown separately
  • Freight, insurance, lead time and payment terms normalized
  • Mill test certificates, quality claims and inspection rights compared

Build a customs broker evidence pack before the next entry

The goal is to give the customs broker one coherent file that connects the product, manufacturer, origin, tariff classification, invoice declaration, value and shipment. This reduces the chance that a correct percentage is applied to the wrong goods or the wrong producer.

Keep a dated record of the sources checked. TARIC is updated regularly, and the broker should confirm the measure and code as of the actual declaration date. If the product description, manufacturer, origin or invoice changes, repeat the relevant checks instead of carrying forward an old result.

  • Technical datasheet, grade, dimensions, finish and processing description
  • CN/TARIC classification rationale and any BTI or broker advice
  • Country-of-origin evidence and actual manufacturer identity
  • Producer-specific TARIC additional code and Annex reference
  • Commercial invoice with the prescribed Article 1(3) declaration
  • Purchase order, packing list, mill test certificate and transport documents
  • Customs value, net free-at-Union-frontier price, freight and insurance inputs
  • Customs entry/release date and any prior registration reference
  • Supplier quote comparison and unresolved questions

Worked example: an EU importer buying 200 tonnes from India

An EU service-centre buyer is considering 200 tonnes of uncoated cold-reduced flat steel from an Indian mill. Before comparing the price, the buyer obtains the grade, width, thickness, coil form, surface finish, processing description, manufacturer legal name and country-of-origin evidence. The buyer then asks the broker to confirm that the actual goods fall within Article 1(1), rather than relying on a broad heading alone.

Assume, only for illustration, that the relevant net free-at-Union-frontier price before duty is €200,000 and the goods are within scope and originate in India. At 9.5%, the anti-dumping component is €19,000. The buyer then adds the separately assessed ordinary customs duty, VAT, freight, insurance, port and handling costs to the landed-cost model.

Before using any producer-specific TARIC code, the buyer checks the legal manufacturer and the signed invoice declaration. If the required declaration is missing, the all-other-imports rate applies. For India that rate is also 9.5% in this regulation, but the producer and additional-code evidence still matters for a correct customs declaration and audit trail.

Use Needo to organize the product, producer and duty evidence

Needo can structure the review around the actual product and transaction rather than returning a generic tariff percentage. Provide the technical specification, proposed CN/TARIC code, origin, producer, supplier invoice, quantity, Incoterm, customs date and available shipping documents.

The workflow separates facts supported by the regulation or supplier documents from assumptions that still need confirmation. It can prepare a product-scope matrix, producer/invoice checklist, value-input worksheet, quote comparison and questions for the customs broker. It cannot issue a binding tariff classification, make a customs declaration or guarantee the final amount assessed.

Importer checklist: GO, CLARIFY or HOLD

Use a clear decision state for each shipment. A low duty percentage is not a reason to proceed if the product scope, origin or producer cannot be established. Likewise, an unresolved code should not be silently converted into a confident duty estimate.

  • GO to the broker's final entry review when product scope, origin, producer, invoice declaration, TARIC code, customs value and entry date are evidenced.
  • CLARIFY when a technical characteristic, ex-code boundary, producer identity, Annex code, invoice declaration or value adjustment is missing but can be resolved.
  • HOLD the commercial or customs handoff when origin is inconsistent, the invoice declaration is unsupported, product scope is uncertain or the supplier refuses reasonable evidence.
  • Recheck TARIC and the Official Journal before each new customs entry; do not reuse a prior rate without confirming the date and facts.

Sources and further reading

Sources support the specific points noted above. Confirm current requirements for your product, destination and contract before committing.

Need the actual problem solved?

This guide explains the method. Needo can work from your specific requirement, compare relevant options, verify important details and help move the next step forward.

Start with your exact problem →

Selling or exporting? See live buyer requirements by product · see a sample verified shortlist