NEEDО · UK EXPORT CONTROLS & LICENSING
UK GEA001 Transition: How Dual-Use Exporters Should Move to the Replacement OGEL by 1 April 2027
UK exporters using General Export Authorisation No 001 (GEA001) for dual-use items need to review a specific transition before 1 April 2027. The Export Control (Amendment) Regulations 2026, SI 2026/1150, were made on 29 October, laid before Parliament on 3 November and are due to come into force on 1 December 2026, subject to parliamentary procedure as the ECJU notice states. They remove the assimilated GEA001 from the dual-use framework, while regulation 19 provides a transitional period for exporters already registered to use it immediately before commencement. The transition is limited to Great Britain; the Export Control Joint Unit says EU GEA001 continues for exports from Northern Ireland under the applicable EU framework. This guide turns the statutory change into an exporter-side review plan. It does not grant an authorisation or replace the licence conditions.

1. What changes on 1 December 2026?
The Export Control (Amendment) Regulations 2026 update the Export Control Order 2008 and the assimilated Dual-Use Regulation. The instrument updates military and dual-use control lists, certain country listings and the treatment of GEA001. It was made on 29 October 2026, laid before Parliament on 3 November and states that it is due to come into force on 1 December 2026, subject to parliamentary procedure. The Export Control Joint Unit's Notice to Exporters 2026/24, updated on 11 November, explains the transition and identifies the replacement Open General Export Licence for export of dual-use items.
For Great Britain, the regulations omit Annex IIa, which contained the assimilated GEA001. The replacement route is the UK open general export licence (OGEL) for export of dual-use items. Do not read this as a statement that every exporter or every dual-use item automatically qualifies for the new OGEL. Its own item, destination and operational conditions must be checked, and registration through SPIRE is required before using it.
Key dates and geography
- 29 October 2026: SI 2026/1150 made.
- 3 November 2026: instrument laid before Parliament.
- 1 December 2026: commencement date stated in the instrument.
- 1 April 2027: end of the transitional period for qualifying existing GEA001 users.
- Part 3 of the instrument applies to Great Britain; Northern Ireland continues under the applicable EU dual-use framework.
2. Check whether the exporter qualifies for the GEA001 transition
Regulation 19 defines a registered exporter by reference to an exporter that was registered with the Secretary of State to use the assimilated GEA001 immediately before the date the regulations come into force. The transition therefore depends on the exporter's registration status at the relevant moment. Keep the original SPIRE or other official registration confirmation, the legal entity name, exporter identifiers, account details and any amendments that show which entity held the registration.
The transition is not a general extension for any business that once used GEA001, has an application in progress, has a saved copy of the licence or has a commercial order that mentions it. If the legal exporter changed, the business was restructured, a subsidiary will make the export or the registration cannot be found, treat eligibility as unresolved. Ask the Export Control Joint Unit or a qualified export-control adviser to confirm the position before relying on the transition.
Eligibility evidence
- Exact legal name and address of the exporter that held the GEA001 registration.
- Official registration reference and date, showing status immediately before 1 December 2026.
- Any change of entity, merger, branch, group-company or account-holder details.
- The role of the exporter, broker, consignee and any other party in the transaction.
- Written ECJU clarification where registration identity or status is not clear.
3. Understand what the transition permits—and what it does not
Regulation 19 provides that the amendments removing the assimilated GEA001 do not apply to the Secretary of State or a registered exporter during the transitional period. It defines that period as beginning on 1 December 2026 and ending on 1 April 2027. The Notice to Exporters says exporters registered to use GEA001 on 1 December may continue to use it until 1 April 2027. The wording is tied to the registered exporter and the existing authorisation; it is not a new general permission for any company to start using GEA001 after commencement.
The transition does not remove the need to comply with the conditions of the existing authorisation during the period in which it remains available. Item scope, destination, exclusions, end-use restrictions, recordkeeping and other conditions still matter. Nor does it resolve a separate licence requirement, sanctions restriction, catch-all control, brokering, transit or technology-transfer issue. Treat each shipment as a transaction-specific assessment and preserve the evidence that supports the route used.
Do not assume
- That a historic registration automatically covers a different legal entity.
- That every item or destination is within the existing GEA001 scope.
- That an order placed before 1 December is exempt from all export-control rules.
- That the transition removes end-use, end-user, sanctions or recordkeeping checks.
- That GEA001 can be relied on after 1 April 2027 without another valid authorisation.
4. Compare the replacement dual-use OGEL against the actual business
The replacement OGEL for export of dual-use items was published on 25 June 2026 and updated on 20 October 2026. GOV.UK describes it as permitting a wide range of dual-use listed items to a variety of destinations, including EU member states, the United States and others. The list of permitted destinations was expanded on 20 October to include Bahrain, Botswana, Brunei, Jordan, Kuwait, Mauritius, Morocco, North Macedonia, Oman, the Philippines, Qatar and Seychelles. That summary is not enough to decide whether a specific item, destination or end use qualifies.
Read the current licence document itself. Compare the controlled-item entry, technical parameters, destination, consignee, end user, end use, exclusions, conditions, recordkeeping and reporting requirements with the company's actual exports. A destination appearing in a general description does not mean every product or end user there is covered. A licence can have conditions that are easy to miss when a team relies only on an old spreadsheet or a sales team's country list.
Create an item-and-destination comparison
- UK control-list entry and the technical facts supporting the classification.
- Exact destination and any transit, re-export or onward-transfer route.
- Consignee, ultimate end user and stated end use.
- Any exclusions, embargoes, sanctions or end-use restrictions.
- Record location, inspection access, retention period and internal owner.
5. Register through SPIRE and document the record location
The GOV.UK page for the replacement OGEL states that exporters must register through SPIRE, the online export licensing system. The registration requires the exporter to state where it will keep records of exports or transfers and where the Export Control Joint Unit may inspect them. That means the transition is also a records-management task: identify the system, file owner, access permissions, retention policy and process for retrieving a complete transaction file.
Do not treat the act of opening a SPIRE account, saving a draft or reading the OGEL as registration. Preserve the submission confirmation, the registered legal entity, the licence reference and any conditions or amendments. Ensure the team responsible for shipping can see the current authorisation and that finance, sales, engineering and logistics use the same exporter and item data. If a group has several entities or sites, map which one is the exporter of record for each transaction and do not share an authorisation across entities without a valid basis.
Registration and recordkeeping checklist
- SPIRE account and authorised user access confirmed.
- Correct legal exporter selected for the registration.
- Required record-storage location stated accurately.
- ECJU inspection access and internal retrieval process assigned.
- Registration confirmation and licence version saved in the controlled compliance file.
6. Use a staged timeline from now to 1 April 2027
A controlled transition starts before the first effective date. In November, identify every legal entity and business unit using GEA001, obtain the registration evidence, list the products and destinations shipped under it and compare those flows with the replacement OGEL. Before 1 December, resolve missing registration records and ask ECJU for clarification where the entity or scope is uncertain. Update the export-control register with the new statutory dates and assign an owner for each open action.
From 1 December 2026, qualifying registered exporters can use the statutory transition through 1 April 2027, subject to the existing authorisation's terms and the legal conditions. Use that period to complete the replacement OGEL review and SPIRE registration, train relevant staff, update ERP and shipping instructions, and test that records can be retrieved. Do not wait until the final week. By 1 April 2027, the exporter should have a confirmed lawful authorisation route for each relevant transaction and should stop relying on the transitional GEA001 route after its stated end.
Practical transition milestones
- Before 1 December 2026: confirm qualifying registration and map existing GEA001 transactions.
- From 1 December 2026: record the start of the statutory transition and maintain all applicable GEA001 conditions.
- During the transition: compare the replacement OGEL, register through SPIRE and update internal records.
- Before 1 April 2027: close open scope and registration issues and train the shipping team.
- From 1 April 2027: use only an authorisation route valid for the exporter, item, destination and transaction.
7. Check the updated control lists and destination schedules
SI 2026/1150 also updates Schedule 2 to the Export Control Order 2008 and Annex I to the assimilated Dual-Use Regulation. The Export Control Joint Unit says the changes reflect 2025 reviews of multilateral export-control regimes, including the Wassenaar Arrangement and the Australia Group, and include controls on advanced and emerging technologies such as semiconductor manufacturing equipment, advanced computing technologies and specialised materials. A company should review the exact list entries relevant to its products rather than assume that a broad product family has one unchanged status.
The instrument also changes Schedule 4 country listings to reflect UK sanctions regimes, moving Haiti from Part 3 to Part 2 and the Central African Republic from Part 2 to Part 3. These are specific changes in the schedule for stricter export or trade controls, not a substitute for checking the current sanctions and destination rules for every transaction. If a product, destination or end user raises a control question, route it to the export-control owner before a quote or shipment commitment is made.
Product and destination refresh
- Review current UK control-list entries and technical parameters for each relevant product.
- Check software, technology transfer, remote access and technical assistance where applicable.
- Re-check destination and transit countries against current schedules and sanctions.
- Reconfirm end user, end use, consignee and onward-transfer route.
- Record the list version and date used for each classification decision.
8. Keep Great Britain and Northern Ireland routes distinct
The Export Control Joint Unit states that the GEA001 change applies in Great Britain only and that EU GEA001 continues to apply to exports from Northern Ireland under the applicable EU dual-use framework. The statutory instrument's Part 3 extent is England and Wales, and Scotland. Do not copy a Great Britain transition plan into a Northern Ireland export file without checking the EU rules and the actual exporter and movement facts.
A business operating across Great Britain and Northern Ireland should map the exporting establishment, where the goods are located, the party making the export, the destination, any movement between the two jurisdictions and the control framework that applies. A group company may have more than one registration or authorisation route. Keep separate records for each legal entity and jurisdiction so that a shipment is not released under the wrong licence simply because the group uses one shared compliance spreadsheet.
Jurisdiction fields
- Exporting legal entity and establishment.
- Where the goods are located when the export or transfer takes place.
- Whether the route is from Great Britain or Northern Ireland.
- Destination, transit and any onward movement.
- Applicable UK or EU authorisation and registration evidence.
9. Build the exporter evidence file before changing procedures
A transition file should let a reviewer reconstruct what the business was authorised to do, which exporter used the authorisation, what items and destinations were involved and how the replacement route was selected. Keep the current GEA001 registration, the legal instrument, the Notice to Exporters, the existing and replacement licence versions, SPIRE registration evidence, item classification records, destination checks and representative shipment records together. Record the owner and review date for every control.
Where the replacement OGEL does not cover a particular item, destination or end-use scenario, do not force the transaction into it. Identify whether a different open licence or a specific licence is required, or whether the export should be held. The export-control owner should record the decision, the evidence and the source version. A sales quote or purchase order should not promise that a licence is available until the responsible reviewer has confirmed the route.
Evidence register
- GEA001 registration and legal exporter identity.
- SI 2026/1150 and regulation 19 transition reference.
- Replacement OGEL version, scope and conditions.
- SPIRE registration confirmation and record-location statement.
- Item classification, destination, end-user and end-use assessment.
- Shipment records, approvals, exceptions and staff training evidence.
10. Worked example: a Great Britain exporter with an existing GEA001 registration
Illustrative example: a company in England has a valid GEA001 registration immediately before 1 December 2026 and exports a dual-use listed item to a destination it believes is covered. The compliance manager records the legal entity and registration reference, checks the item entry and destination against the existing GEA001, and confirms that the exporter is within regulation 19's registered-exporter definition. The company may rely on the transitional period until 1 April 2027 only while the applicable conditions are met. In parallel, it compares the item and destination with the replacement OGEL and completes the required SPIRE registration and record-location declaration.
A different group company in Northern Ireland cannot simply use the England company's Great Britain transition record. The business must review the applicable EU dual-use framework for the Northern Ireland export and keep that file separate. Likewise, a Great Britain company that cannot prove it was registered immediately before commencement should not assume that a pending application or an old internal copy qualifies. In either case, the next move is a documented check with ECJU or a qualified adviser, not a shipment based on an assumption.
11. Use Needo to organize the GEA001-to-OGEL transition
Give Needo the exporter's legal details, GEA001 registration, product and control-list information, destination list, existing shipment records, replacement OGEL and SPIRE evidence. Ask it to compare the old and new licence conditions, identify the transition dates, map the Great Britain or Northern Ireland route, create a product-and-destination matrix and list the records that must be retained. It can prepare an internal action plan and questions for ECJU, but the export-control owner must confirm the legal route.
The useful outcome is a controlled transition file with one owner, one deadline and evidence for each item, destination and exporter. Keep any unresolved scope or registration issue open. Needo should not mark a licence as granted, register the company with SPIRE, certify compliance or authorise a shipment. Those actions remain with the exporter and the competent authorities under the applicable rules.
Sources and further reading
- GOV.UK — Notice to Exporters 2026/24: amendments to UK strategic export controls, updated 11 November 2026
Official ECJU explanation of the 1 December 2026 change, GEA001 transition, 1 April 2027 end date and Great Britain/Northern Ireland distinction.
- Legislation.gov.uk — The Export Control (Amendment) Regulations 2026, SI 2026/1150
The statutory instrument, including commencement, list amendments and the legal basis for the GEA001 transition.
- Legislation.gov.uk — Regulation 19: Transitional Provision
Exact definition of registered exporter and the transitional period ending 1 April 2027.
- GOV.UK — Open General Export Licence (export of dual-use items)
Current replacement OGEL, permitted destinations, licence document and SPIRE registration requirement.
- SPIRE — UK online export licensing system
Official system used for registration and export-licensing administration; the exporter must follow the current official process.
Sources support the specific points noted above. Confirm current requirements for your product, destination and contract before committing.
Need the actual problem solved?
This guide explains the method. Needo can work from your specific requirement, compare relevant options, verify important details and help move the next step forward.
Start with your exact problem →Selling or exporting? See live buyer requirements by product · see a sample verified shortlist